How It Works:
1) Wall-mounted transmitter: Transmitter isthe central controller to whole electronic system. Make sure the wire is set toa loop.
2) The receiver collar: Receiver (collar)will make a warning beep firstly and then continuous stimulation if your dogattempts to approach wire boundary.
3) How to install the system
*Design your containment area and calculatethe amount of wire needed.
*Install the wall transmitter.
*Lay out the perimeter wire.
*Connect the perimeter wire to the walltransmitter.
*Verify transmitter is functioning withoutproblem.
*Set up the receiver and then, test thecontainment system and adjust the field width.
*Install the boundary wire and trainingflags.
*Fit collars to your dogs and train yourdogs.
Specifications:
Transmitter Size: 14.3x9x5cm/5.63x3.55x1.97in
Per Collar Receiver Size: 6.5x3.5x3cm/2.56x1.38x1.19in
Package Size: 29.6x18.4x6cm/11.66x7.25x2.37in
Package Included:
1x Indoor Wall-mounted Transmitter
1x Adjustable Receiver Collars w/Neck Straps
1x Power Adapter w/ Charging Cable
1x boundary wire of 300 metres
1x Test Bulbs
2x Extra Metal Contact Points
4x Screw
20x Training Flags
1x User Manual
Note:
*Only use it for dog, not any otheranimals.
*Let your dog adapt to the collar beforeyou start training. You should allow your dog to accept the collar as a part ofher life.
*When the collar in your dog, do not setthe program.
*Keep away from children can touch theplace.
* Please read all instructions before usingthis product.
1) Wall-mounted transmitter: Transmitter isthe central controller to whole electronic system. Make sure the wire is set toa loop.
2) The receiver collar: Receiver (collar)will make a warning beep firstly and then continuous stimulation if your dogattempts to approach wire boundary.
3) How to install the system
*Design your containment area and calculatethe amount of wire needed.
*Install the wall transmitter.
*Lay out the perimeter wire.
*Connect the perimeter wire to the walltransmitter.
*Verify transmitter is functioning withoutproblem.
*Set up the receiver and then, test thecontainment system and adjust the field width.
*Install the boundary wire and trainingflags.
*Fit collars to your dogs and train yourdogs.
Specifications:
Transmitter Size: 14.3x9x5cm/5.63x3.55x1.97in
Per Collar Receiver Size: 6.5x3.5x3cm/2.56x1.38x1.19in
Package Size: 29.6x18.4x6cm/11.66x7.25x2.37in
Package Included:
1x Indoor Wall-mounted Transmitter
1x Adjustable Receiver Collars w/Neck Straps
1x Power Adapter w/ Charging Cable
1x boundary wire of 300 metres
1x Test Bulbs
2x Extra Metal Contact Points
4x Screw
20x Training Flags
1x User Manual
Note:
*Only use it for dog, not any otheranimals.
*Let your dog adapt to the collar beforeyou start training. You should allow your dog to accept the collar as a part ofher life.
*When the collar in your dog, do not setthe program.
*Keep away from children can touch theplace.
* Please read all instructions before usingthis product.